VHDL Design With Verilog Testbench

--VHDL Design for 4:1 multiplexor

library ieee;
use ieee.std_logic_1164.all;
entity Mux is
  port(I3  : in  std_logic_vector(2 downto 0);
        I2 : in  std_logic_vector(2 downto 0);
        I1 : in  std_logic_vector(2 downto 0);
        I0 : in  std_logic_vector(2 downto 0);
        S  : in  std_logic_vector(1 downto 0);
        O  : out std_logic_vector(2 downto 0)
        );
end Mux;
architecture behv1 of Mux is
begin
  process(I3, I2, I1, I0, S)
  begin
    -- use case statement
    case S is
      when "00"   => O <= I0;
      when "01"   => O <= I1;
      when "10"   => O <= I2;
      when "11"   => O <= I3;
      when others => O <= "ZZZ";
    end case;
  end process;
end behv1;

 

//Verilog Test Bench for 4:1 VHDL multiplexer

module mux_tb (i3,i2,i1,i0,s,o);
   input  [2:0] o;
   output [2:0] i3;
   output [2:0] i2;
   output [2:0] i1;
   output [2:0] i0;
   output [1:0]  s;
   //Drivers for output
   reg [2:0] i3;
   reg [2:0] i2;
   reg [2:0] i1;
   reg [2:0] i0;
   reg [1:0] s;
   //Error counter
   integer   error_count;
   //Generatiin test cases
   initial
     begin
error_count = 0;
//Assigning different values for different signals
i3 = 3'h4;
i2 = 3'h7;
i1 = 3'h0;
i0 = 3'h5;
        //Case1
s  = 2'b00;
#2 //wait for 2 delays
if (o != 3'h5)
   begin
      $display("Error in case 1\n");
      error_count = error_count + 1;     
          end
        //Case2
s  = 2'b01;
#2 //wait for 2 delays
if (o != 3'h0)
   begin
      $display("Error in case 2\n");
      error_count = error_count + 1;     
          end
        //Case3
s  = 2'b10;
#2 //wait for 2 delay
if (o != 3'h7)
   begin
      $display("Error in case 3\n");
      error_count = error_count + 1;     
          end
        //Case4
s  = 2'b11;
#2 //wait for 2 delay
if (o != 3'h4)
   begin
      $display("Error in case 4\n");
      error_count = error_count + 1;     
          end
//Test Summary
if(error_count)
   $display("ERROR in the design");
else
   $display("All test cases are passed");
     end
//mux instantiation and port mapping
   mux one(.i3(i3),.i2(i2),.i1(i1),.i0(i0),.s(s),.o(o));
endmodule

No comments:

Post a Comment

Please provide valuable comments and suggestions for our motivation...

Popular Posts